Tilkom LTD
rus  |  eng
 
 
 

Telemetry TT20

Telemetry TT20 is the 7-channel telemetry system. It is used for amplifying and contactless transmission of signals from the strain gauges mounted on the rotating machine parts to the stationary measuring unit or data acquisition system. It is suitable for measurements of various physical quantities such as strains, forces, torque, when the strain gauges technology is applied. TT20 includes a telemetry assembly and a decoder. The rotor of the telemetry assembly is fitted to the end of the rotating shaft and electrically connected directly to the strain gauges. The stator housing is supported on the rotor by two ball bearings and electrically connected to the decoder. The excitation voltage for the strain gauges and rotating electronics is inductively coupled to the rotor. There is the built-in rotation speed measuring system.

Telemetry TT20Special features
  • 7-channel contactless transmission of measuring signals
  • Digital bridge balancing
  • Digital measuring range setting
  • Additional channel for nominal output signal, zero signal and excitation voltage control
  • High-level analog output signal
  • Inductive power supply
  • The built-in rotation speed measuring system


TypeTT10
Number of measuring channels 7
Permissible strain gauge full bridge resistance Ω 100…1000
Nominal input signal, switchable in 4 steps mV/V 0.25; 0.5; 1; 2
Characteristic tolerance % ±0.5
Bridge balance range in 128 steps mV/V ±0.98
Bridge excitation voltage V 5
Nominal output voltage of the decoder at a nominal input signal V ±5 3±2.5 on request
Temperature effect per 10K in the nominal temperature range on the zero point at the decoder output % <0.2
Measurement frequency range (-3dB) Hz 0…200
Signal to noise ratio dB >60
Channel-to-channel isolation dB -52
Operating voltage of the telemetry assembly V 8…12
Operating voltage of the decoder V ±8
Nominal temperature range °C -40…+50
Degree of protection   IP52
Cable length m10
Maximum speed rotationmin-16000


Accessories, to be ordered separately:
  1. Multi-channel measuring unit

Tilkom LTD
 220072, Minsk, Republic of Belarus,
P. Brovki str, 17-401,
phone/fax: +375 17 284 11 83; phone: +375 17 284 12 65; cell +375 29 6713427
E-mail: info@tilkom.com