Tilkom LTD

 

 

 

M27 Torque/screw torque transducers

The M27 Torque/Screw Torque Transducers are used to measure torque and the angle of rotation when screw connections are being tightened. These transducers are bi-directional that is why both tightening and break-away torques can be measured. The M27 transducers are designed with bearings between the rotor and the stator and with the contactless transmission of data and power.

Special features: Design without slip-rings Operating on the strain gauge principle Measurement of static and dynamic, positive and negative torque on rotating and stationary parts Contactless transmission of data and power Built-in angle of rotation measurement system Maintenance-free Accuracy class: 0.2 Torque output signal: ±2V

Nominal torque	5Nm, 10Nm, 20Nm, 50Nm, 100Nm, 200Nm, 500Nm, 1000Nm
Nominal speed	4 000 min-1
Nominal output signal	±5V
Accuracy class	0.2
Excitation voltage	12V (DC)
Current consumption	<200mA
Nominal temperature range	0…+60 °C

Accessories, to be ordered separately:

1. T20 Measuring unit.

Data Sheet (pdf file, 196kb)

Tilkom LTD
 220072, Minsk, Republic of Belarus,
P. Brovki str, 17-401,
phone/fax: +375 17 284 11 83; phone: +375 17 284 12 65; cell +375 29 6713427
E-mail: info@tilkom.com